Aeitto Blender Maintenance Guide: Clean, Care, and Extend the Life of Your High-Speed Powerhouse

The Aeitto High-Speed Blender delivers 1500 watts of crushing power in a sleek countertop design. From smoothies to soups and frozen drinks, it can handle nearly any blending task. But to keep it blending strongly for years, regular maintenance is essential.

This comprehensive guide breaks down exactly how to clean, deep clean, and protect your Aeitto blender, from the blades and jar to the motor base and gasket, so you don’t run into performance or hygiene issues later on.

---

Why Maintenance Matters

A powerful blender like the Aeitto relies on strong internal components and sharp engineering tolerances. When food residue builds up or parts are left damp, it affects:

• Blending consistency
• Blade rotation smoothness
• Odor retention
• Mold growth in gaskets and lids
• Risk of overheating the motor

Many performance issues stem not from the motor but from improper cleaning routines. With proper care, your Aeitto blender can last years — and maintain the same blending power it had on day one.

---

Cleaning Materials Overview

Here’s what you’ll need:

• Warm water
• Mild dish soap (non-abrasive)
• White vinegar
• Baking soda (optional)
• Soft sponge or microfiber cloth
• Soft-bristle bottle brush
• Cotton swabs or a small silicone brush
• Dry towel or air-dry rack

Avoid:

• Abrasive scouring pads
• Bleach or high-alkaline cleaners
• Dishwashers for base or lid components

---

Daily Cleaning Routine

Aeitto recommends cleaning the blender immediately after each use to prevent build-up, staining, and mold.

Steps:

1. Unplug the unit.
2. Rinse the jar with warm water.
3. Fill halfway with water + 1 drop of dish soap.
4. Run on medium speed for 30 seconds.
5. Rinse thoroughly and air dry upside down with the lid removed.

You can find more usage tips and blending performance info in our Aeitto high-speed blender performance review.

---

Deep Cleaning Routine

If your blender starts to smell, look cloudy, or feels sticky, it’s time for a deeper clean.

For Odors:

• Fill the jar with 50/50 vinegar and warm water
• Blend on high for 60 seconds
• Let sit for 15 minutes
• Rinse thoroughly and air dry

For Residue or Stains:

• Use baking soda paste (1 tbsp soda + a few drops of water)
• Apply with a soft sponge
• Gently scrub the inside of the jar, especially near the blade
• Rinse and dry

For regular stain removal and care guides across all brands, check out our complete blender maintenance archive.

---

Blade & Gasket Maintenance

The Aeitto’s six stainless steel blades are fixed inside the jar, but they can collect buildup quickly — especially with nut butters or protein shakes.

Blade Cleaning:

• Use a long silicone brush or bottle brush to reach under the blade
• Avoid sticking fingers inside; the blades are dull but powerful
• Always clean after thick blends like hummus, nut butter, or frozen fruits

Gasket Zone:

• The lid gasket can trap moisture, especially around the edges
• Remove and clean it weekly
• Use a cotton swab to clear corners if residue is visible
• Dry thoroughly before reassembling

---

Motor Base Cleaning

The motor base contains electronic components, so never submerge or spray it directly.

Steps:

1. Unplug before cleaning
2. Use a damp microfiber cloth to wipe the surface
3. Dry with a towel
4. Clean around buttons or the digital display with a cotton swab
5. Use a soft brush to clear dust from the air vents underneath

---

Troubleshooting Common Issues

Blender Won’t Turn On:

• Ensure the jar is seated securely
• Check for overheating, let it cool for 20 minutes
• Verify that the lid and base alignment are correct

Burning Smell During Use:

• May indicate food stuck beneath blades
• Stop blending, rinse, and clean under the blades
• Avoid overloading the jar beyond the max fill line

Leaking from Bottom:

• The gasket may be misaligned or cracked
• Check the tightness of the blade base
• Clean and inspect regularly to prevent long-term damage

For product-specific support and manuals, you can also visit Aeitto’s official support page.

---

Maintenance Tips for Heavy Use

Daily smoothies? Meal prepping sauces or soups every week? Here’s how to extend lifespan:

Task	Frequency	Purpose
Rinse immediately after each use	Every use	Stops residue buildup
Deep clean with vinegar	Weekly	Neutralizes odors and bacteria
Remove and dry gasket	Weekly	Prevents mold growth
Remove and dry the gasket	Weekly	Keeps air vents clean
Use soft tools only	Always	Protects plastic jar and blades

---

Seasonal Deep Cleaning

Every 2–3 months, go deeper:

1. Disassemble the lid, gasket, and jar
2. Soak everything (except the base) in warm, soapy water
3. Clean the blade area with a vinegar solution and a bottle brush
4. Dry thoroughly
5. Inspect the power cord for fraying or moisture wear
6. Check base vents and wipe down feet

This is especially important during summer when heat and humidity can trap moisture in the gaskets and corners.

---

Long-Term Storage Tips

If you store the Aeitto for weeks or months:

• Clean all components thoroughly before storing
• Store the lid off the jar to allow airflow
• Never store the pitcher on the base
• Coil the power cord loosely
• Use a dry cabinet or covered box to prevent dust

---

Mold Prevention

Mold usually forms in three areas:

1. Under the lid gasket
2. Inside the jar handle or grooves
3. Where the jar connects to the blade base

Prevent It By:

• Air drying all parts separately
• Removing the lid after cleaning
• Cleaning gasket zones with vinegar regularly
• Never reassemble while wet
• Avoid dark or humid cabinets for storage

---

Replacement Part Care

Aeitto replacement parts (like jars, lids, or gaskets) can be ordered directly from the manufacturer at aeitto.com.

How to Care for Replacements:

• Hand-wash all new parts before first use
• Don’t dishwash replacement jars; it can void the warranty
• Label older parts if you keep backups
• Store gaskets in a sealed dry bag to prevent dust exposure

---

FAQ: Aeitto Blender Maintenance